PARKING SENSORS
X-VISION 'N' (12V) SERIES

These systems are designed specifically as a parking aid. There is a choice of two (2) - XP328N, or four (4) - XP348N ultrasonic sensor units which are fitted into the front bumper bar of a vehicle. The system will only be activated when the power switch is ON. The light of the LED display unit, mounted on the dashboard will alert the driver when parking of any presence of object/s and the distance in front/front-side of the vehicle.

The LED Display unit comprises two sets (Left and Right), each of five separate lights indicating the following:-

Outer light: 90cms (3ft) zone. (Maximum)
2nd light: 75cms (2.5ft) zone.
3rd light: 60cms (2ft) zone.
4th light: 45cms (1.4\5ft) zone.
Inner light: 30cms (1ft) zone.

An audible tone will beep for one second only at the 30cms (1ft) zone. There are no other audible beeps. As for the Reverse Sensors, these units can be colour coded to match that of the vehicle and/or bumper-bar.

Where an LED display unit is fitted, the light up reversing sequence is as illustrated below:

Installation calls for the sensors to be mounted parallel with level ground, accordingly 10 degree angled micro-sensors to compensate for curved bumper bars are readily available.

This system is suitable for most cars, utes and light commercial vehicles.

 
BENEFITS AND ADVANTAGES
Asymmetrical detection technology
Small sensor diameter of 19mm
Flush and paintable sensor surface
Prevents and reduces accidents
Reduces stress when parking
Help getting ain and out of tight parking spots
 
TECHNICAL SPECIFICATIONS  
Power Requirement: DC10V - 25V
Max. Current Consumption: 200mA - 500mA (with display)
  0.5mA (without display)
Operating Temperature: -20 - +70 (degrees celcius)
Storage Temperature: -30 - +80 (degrees celcius)
Transmitting Frequency: 40KHz
System Response Time: 0.12sec
Buzzer Sound Pressure Level : 80 dB at 10cm
 
 
 
 
   
 
Williams Geddes Pty Ltd © 2006 All Rights Reserved